Modelling Mag Wheels: How to Create Mag Wheels

How to Model Mag wheels

Step 1

First you have to download the program, its call 3D animation and install it to your computer. When finished the installing. First go to file go to new than click new port. Go to insert go to reference geometry click access now choose to top link and right link than click ok, then click on right plank then starch then starch from the centre line, give centre line a length of 11 centimetre .

Step 2

Choose the line sewer, and then starch a line from the right top corner of the centre line. Draw the shape of Wheels line and select all the line then choose tangent each line give damnation 20 to 45.Choose the mire entity to select all line, right click to accept then you will see those line that drew will look like Mag wheels.

Step 3

Now choose the right plan then choose e the section view then click ok. Choose the line tool drew line on image give the damnation 70.choose the origin give the damnation 110; give the next line the damnation 30. Go futures choose all the bears choose the access then escape the section bodies new your image should look like Mag wheels. Start new starch. Seecatch the lull the faces give it the diameter.

Step 4

Go into insert and click on curve and click on split line faces all the splits right click to accept. Now go to surfaces put insert click surfaces go on offset surfaces. Now in distances type the number that you want to cut the surfaces. Then click ok go to insert Features go to move copy click on surface in c type the number you want. Make sure you copy cheek. Right click body folder check height.

Step 5

Go into insert go to surface and click on extend go to distance and type in two. Make you copy check. Right click the surfaces click on tangency right click to accept. Go to insert surfaces extended right click the surfaces click on tangency. Right click to accept. Right click to solid bodies then on show. Now click on the face on click on speak and then click on solder bodies and then height. Now expand the split line and chose convert entities.

Step 6

Now expand the split lines then click on sketch then choose covet entities then features then to extruded boss/base. And in direction then click on up to surfaces. Make sure merge is UN checking then ok. Go to insert go to cut with surfaces. And choose surfaces make sure the surface is right. Uncheck auto select. Then select the body then ok, now click surfaces body choose height. Then right click on solid bodies and choose studio. Now choose filet type three. Add some filets to the patches expand solider bodies right click combined make sure you have operation type then ok.

Step 7

Now choose filet type three make sure you have click on partial preview on no preview select now select some patches. To add filets then right click to accept. Now click on the middle patch. Then click on insert and click on reference geometry then plane. Then ok. Then click on plane one. Then covert entities go to features and make it to 10 mm and another direction 15 mm then click ok. Then click on filets and the chambers and in distance type in 10 and in angle type 30 choose the middle patch. Choose hole wizard make sure you have everything there and its 12 and go to dossiers and make all the points go into in sort go to face move then click on the bottom side in c type 5 then click ok now choose the vertical Patton and fates Patton so you can expand it and make a carcase Patton. And make sure you have 5 then click accept. Then you can add some colours. Click on prances go to painted click on car select the colour you want. Yes, that it is your Modelling Mag wheels.

When you done it and then your Mag wheels should look like these Images